Causes for Leaky Faucets in Belleville, Illinois

Faucets are an integral part of any home. Having ready access to water is essential and when something goes wrong it needs to be fixed as soon as possible. If you’ve discovered you have a leaky faucet in your Belleville, Illinois home, it is, no doubt, annoying. Determining why you have a leaky faucet is the first step in addressing the problem and fixing the issue. Leaky faucets can cause problems that are annoying to catastrophic so it’s important that you get the issue fixed. Leaky faucets disrupt sleep with constant annoying dripping and also increase your water bill. Learn some of the common reasons why a faucet leaks.

O Ring Problem

The O ring is a small disc that attaches to the stem screw that’s used to hold the handle of a faucet in place. O rings work much like a washer. They seal up gaps where water would otherwise escape through. The handle of a faucet is a common place for dripping to occur. The faucet will begin to leak around the handle when the O ring becomes loose or is weakened with frequent use. The easy fix for this issue is to replace the damaged O ring with a new one.

Valve Seat Corrosion

The faucet and the spout in the compression mechanism is connected by the valve seat. The valve seat can become corroded due to a build-up of water sediments. This will cause leaking around the spout area. To take care of this plumbing issue, you should clean the valve seat regularly to prevent the accumulation of sediment. Such cleaning will usually require the services of a professional plumber.

faucet maintenance

Loose Parts

There are several individual components that make up the sink and the faucet. If any of these parts becomes loose, it can cause leaky faucets. One of the primary problems that occurs when you’re dealing with loose components is that the connections between the different pipes may not be sealed tightly enough allowing water to leak through the gaps. It can be difficult to find the source of the leak so it is your best bet to have a professional plumber come out and take a look so they can identify the problem and fix the issue.

Leaky Faucets In Belleville IL

Washer Problems

Plumbing problems often occur because there are problems with the washer. A washer is a rubber ring that is used to prevent water from leaking. Washers seal gaps where water would otherwise flow through, resulting in leaks. The unfortunate fact about washers is they they do wear out over time. Every time you use the faucet, the washer is forced against the valve seat. This frequent friction wears the washer down until it is no longer effective at sealing off gaps. As a result, you’ll begin to notice dripping at the spout. Another problem with washers is that they have been installed incorrectly or are the wrong size. Any issues caused by a washer will need to be addressed by installing a new washer. To ensure the washer is the right size and is installed correctly, you’ll need to call a licensed plumber.

There’s probably nothing quite as annoying as a dripping faucet, especially at night when you’re trying to sleep. Not only will you want to fix this problem to take care of the annoyance, but you don’t want a small problem to lead to much bigger problems. And, by addressing the issue early on, you’ll save money on water. If you’re dealing with leaky faucets and other plumbing issues, then you need a professional plumber who you can trust. Look no further than Darwyn’s Plumbing.